Our most popular system, the Pintop kit boasts 2.5", Remote Reservoir King Shocks. Designed and tuned in house for the customer looking for substantial on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than the Backcountry.
Shock Diameter - 2.5"
Lift Height - 3"
Tire Size - UP TO 35"
Front Travel - 10"
Rear Travel - 10.6"
Base Kit Includes:
CS-DMRC-03-H - Multi-Rate Coils
CS-DPT25SPKG-94 - Carli Tuned King 2.5" Remote Reservoir Pintop Shock Package with Reservoir Mounts & Limit Straps, Stainless Shafts
CS-SRM-25 - Short Reservoir Mounts
CS-DLSK9415 - Limit Strap Kit
A “Base Kit” SKU must be accompanied by the SKU of a Sway Bar and Leaf Spring option to form a complete system.
The Pintop is the Backcountry on steroids, take the description for the Backcountry and throw an exponent on it. This system is our most popular, all around suspension system. It was tuned and rides best with the Full Progressive Leaf Springs. The Pintop is a Jack-of-all-trades system from which every Ram owner would benefit. Raising the Ram platform then adding the 2.5” diameter shocks will support the argument that these trucks should come equipped with 2.5” shocks from the factory. The higher end systems will get you more off-road capability, yes, and even a bit more on-road. The premium paid for these systems, however, doesn’t compare to the on and off-road ride quality per dollar spent on the Pintop. For these reasons, it will likely remain our best seller for years to come.
This system boasts Carli specific, blueprinted, King 2.5” shocks on all four corners. In an effort to provide customers with the best product, we designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; we then tuned the shocks around the custom pistons based on the only thing that matters to us, seat-of-the-pants feel. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55* F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.
Your truck will sit 2.5”-3” higher in the front (year/cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted 1”-2” via the customer’s choice of a Progressive Add-A-Pack or Full Progressive Leaf Pack. The Progressive Add-A-Pack replaces the factory overload with a 5-Leaf, progressive pack that changes the final rate of the spring pack keeping the rear planted while increasing traction and predictability. The optional Full Progressive Leaf Pack replaces the entire factory leaf spring assembly increasing travel and drastically increasing comfort throughout the entire usable travel stroke at the cost of a 15% payload reduction from a standard 2500. This payload reduction can be supplemented back to factory 3500 SRW capacity with the addition of the Long Travel Airbags for the best of both worlds; ride quality and payload capacity/load control.
When pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, we offer two options (unless 1994-2002, then there’s only one); extended, Sway Bar End Links or the replacement Torsion Sway Bar. The End links are equipped with ½” FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement points. Factory pillow-bushings are re-used to assemble the sway bar to the lengthened link. Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension (in close competition with the full progressive leaf spring upgrade).
Vehicle Year - 94-02
Model - 2500/3500
Engine - Diesel
Lift Height - 3"
CARLI Suspension - Billet Fuel Cap : The factory RAM diesel fuel filler was designed without a fuel cap provision, leaving your expensive engine vulnerable to dirt, debris, and sedimentary deposits that lay on top of the factory fuel filler neck. The filler is sealed...
SKU: CS-DFEU-T – For T-Style Steering ONLYCS-DLMSS-T – Stainless Low Mount Stabilizer, T-StyleCS-DBJP-03 – Ball Joint PackageCS-DATB-03 – Adjustable Track Bar SKU: CS-DFEU-Y – For Y-Style Steering ONLYCS-DLMSS-Y – Stainless Low Mount Stabilizer, Y-StyleCS-DBJP-03 – Ball Joint PackageCS-DATB-03 – Adjustable Track Bar : Has the steering on your Dodge Ram lost that...
Carli - RAM Adjustable Track Bar 03-13 SKU: CS-DATB-03 : This adjustable track bar is a must for any Dodge 2500/3500 4x4 suffering from wandering steering or with an aftermarket lift. The track bar will center the axle side to side and ensure proper suspension...
SKU: CS-DATB-14 & CS-DATB-1419– Adjustable Track Bar Allows Axle Centering up to 3″ of front lift– Tightens Steering Feel while Extending Service Life– CUB Frame Joint combines with 7/8″ FK Axle Heim to dampen vibration– JAMMIT nut boasts 100% more surface area than standard jam nut–...