Synergy - JEEP Front Steering Correction Kit 07-18 Wrangler JK/JKU

Synergy JK Front Steering Correction kit

Designed to correct the wandering steering feeling that is sometimes experienced when lifting a Jeep JK

The drag link is made from 1.50 x .250 wall DOM tubing

Exclusive double adjuster sleeve and pinch bolt setup for adjustment while the drag link is installed

The track bar bracket raises the vehicles suspension roll center by 3.0"

Special bolt-on design strengthens the factory axle mount that is prone to failure

Raising the roll center reduces vehicle body roll and dramatically improves overall handling

The bracket relocates the factory or aftermarket steering stabilizer up and out of harms way

Requires a maximum 4-3/4" backspace wheel or wheel spacer with factory wheel setup. 4-1/2" back spacing is recommended

Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability

100% bolt on components assures an easy, trouble free installation with the use of basic hand tools

Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance

8000-01 - Synergy JK Heavy Duty Drag Link Kit

8055 - Synergy JK Front Track Bar Bracket

Use of the front track bar bracket requires the use of a minimum 3.0" bump stop spacer

High Steer setup requires the Drag Link to be relocated to the top of the steering knuckle.

Kit requires 16" or larger wheel diameter

Note: 8055 Track Bar Bracket is not recommended for hydro assist applications. For hydro assist, use 8012-13 or 8009-01 weld-on track bar brackets which include hydro assist tabs.

Note: If using a front adjustable track bar other than Synergy, make sure track bar can be collapsed far enough to center axle. Track bar will need to be close to stock length once relocated.