Synergy Heavy Duty Steering Kit for 1994-2013 Dodge Ram 1500/2500/3500

Synergy Heavy Duty Steering Kit for 1994-2013 Dodge Ram 1500/2500/3500

This Heavy Duty Steering Kit is a larger, stronger, bolt-on replacement for the stock steering. No drilling or reaming of the knuckles is required. It uses the updated factory T-style steering design to eliminate toe-change caused by Y-style steering. Using the factory T-style steering design also results in no induced bump steer inherent with most aftermarket "cross over" steering kits.

The Tie Rod also uses low misalignment "wobble stopper" Tie Rod End Boots to prevent unwanted Tie Rod "flop" which results in a dead spot in the steering when changing direction. The complete kit includes a Heavy-Duty Drag Link, Heavy-Duty Tie Rod, and Steering Stabilizer Mount Kit for use with stock or aftermarket steering stabilizers using a 1/2" mounting bolt.

1994-1999:

Part #: 8525-03

Fitment:

• 94-99 Dodge Ram 1500/2500/3500 4x4
  Note: We cannot guarantee fitment with aftermarket differential covers.  Known compatibility with the following diff covers: aFe Power
• Requirement: 98-99 trucks that originally came with T-Style Steering (Where the tie rod connects to both knuckles) must use the pitman arm from 94-97 trucks, stamped TRW-246

Drag Link

• Drag Link is bent to clear factory axle brackets and is compatible from stock to 6" lifted vehicles. (Vehicles over 6" of lift will require a drop pitman arm for compatibility)
• Drag Link is made from 1-1/2" solid 1018 bar.
• Synergy Double Adjuster Sleeve allows adjustment of Drag Link length without removing it from the vehicle.
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
• Drag Link comes with Synergy HD metal on metal tie rod ends, 4133-L and 4136-L.
• Strongest Dodge Drag Link on the market!

Tie Rod

• Tie Rod is bent to clear sway bar mounts and steering pitman arm.
• Provides 2" of additional ground clearance from stock tie rod.
• Made from 1-1/2" x .188 wall 4130 Chromoly and Heat Treated for maximum strength - (200%) stronger than stock tie rod.
• Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
• Tie Rod comes with Synergy HD metal on metal tie rod ends, 4136-L.
• Tie rod ends include low misalignment "wobble stopper" grease boots to prevent unwanted Tie Rod "flop".
• Strongest Dodge Tie Rod on the market!

Tie Rod Stabilizer Clamp

• Fabricated clamp to retain factory or aftermarket stabilizer with 1/2" mounting bolt
• Fox-982-24-941 Steering Stabilizer recommended

Includes:

• 8567-03 Drag Link
• 8568-03 Tie Rod
• 8568-11 Tie Rod Stabilizer Clamp & Drop Bracket

2000-2002:

Part #: 8525-02

Fitment:

• 00-02 Dodge Ram 2500/3500 4x4, 00-01 Dodge Ram 1500 4x4
  Note: We cannot guarantee fitment with aftermarket differential covers.  Known compatibility with the following diff covers: aFe Power

Drag Link

• Drag Link is bent to clear factory axle brackets and is compatible from stock to 6" lifted vehicles. (Vehicles over 6" of lift will require a drop pitman arm for compatibility)
• Drag Link is made from 1-1/2" solid 1018 bar.
• Synergy Double Adjuster Sleeve allows adjustment of Drag Link length without removing it from the vehicle.
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
• Drag Link comes with Synergy HD metal on metal tie rod ends, 4133-L.
• Strongest Dodge Drag Link on the market!

Tie Rod

• Tie Rod is bent to clear sway bar mounts and steering pitman arm.
• Provides 2" of additional ground clearance from stock tie rod.
• Made from 1-1/2" x .188 wall 4130 Chromoly and Heat Treated for maximum strength - (200%) stronger than stock tie rod.
• Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
• Tie Rod comes with Synergy HD metal on metal tie rod ends, 4134-L.
• Tie rod ends include low misalignment "wobble stopper" grease boots to prevent unwanted Tie Rod "flop".
• Strongest Dodge Tie Rod on the market!

Tie Rod Stabilizer Clamp

• Fabricated clamp to retain factory or aftermarket stabilizer with 1/2" mounting bolt.
• Fox-982-24-941 Steering Stabilizer recommended

Includes:

• 8567-02 Drag Link
• 8568-02 Tie Rod
• 8568-10 Tie Rod Stabilizer Clamp

2003-13:

Part #: 8525-01

Fitment: 

• 03-13 Dodge Ram 2500 4x4, 03-12 Dodge Ram 3500 4x4, 06-08 Dodge Ram 1500 Megacab 4x4 
  Note: We cannot guarantee fitment with aftermarket differential covers.  Known compatibility with the following diff covers: aFe Power

Drag Link

• Drag Link is bent to clear factory axle brackets and is compatible from stock to 6" lifted vehicles.  (Vehicles over 6" of lift will require a drop pitman arm for compatibility)
• Drag Link is made from 1-1/2" solid 1018 bar.
• Synergy Double Adjuster Sleeve: allows adjustment of Drag Link length without removing it from the vehicle.
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
• Drag Link comes with Synergy HD metal on metal tie rod ends, 4133-L.
• Strongest Dodge Drag Link on the market!

Tie Rod

• Tie Rod is bent similar to the factory bar to clear sway bar mounts.
• Provides 2" of additional ground clearance from stock tie rod.
• Made from 1-1/2" x .188 wall 4130 Chromoly and Heat Treated for maximum strength - 200% stronger than stock tie rod.
• Synergy Double Adjuster Sleeve: allows adjustment of tie rod length without removing it from the vehicle.
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance.
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools.
• Tie Rod comes with Synergy HD metal on metal tie rod ends, 4134-L.
• Tie rod ends include low misalignment "wobble stopper" grease boots to prevent unwanted Tie Rod "flop".
• Strongest Dodge Tie Rod on the market!

Tie Rod Stabilizer Clamp

• Fabricated clamp to retain factory or aftermarket stabilizer with 1/2" mounting bolt.
• Fox-982-24-941 Steering Stabilizer recommended.

Includes:

• 8567-01 Drag Link
• 8568-01 Tie Rod
• 8568-10 Tie Rod Stabilizer Clamp

Please Note: For 03-08 trucks using the stock pitman arm, switching to the Mopar pitman arm for 08.5+ trucks is recommended if not
already equipped. Mopar P/N: 68039930AA