The EVO MFG 2.5" JL Enforcer Lift Suspension Systems lift your 2018+ Jeep Wrangler JL 2.5"s. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.Â The JL Enforcer kits are specifically designed to lift your JL and maintain compliant spring rate, smooth ride quality with theÂ use of your choice of aftermarket 2/2.5" lift shocks. These kits come with a set of 2.5" Plush Ride Lift springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. EVO MFG JL Enforcer kits are available in multiple configurations to suit your needs and budget and are upgradable down the road. These Enforcer kits will fit up to a 37" tires on Rubicon Model JLs or 35" tires on Sahara and Sport/S.
The EVO MFG 2.5" JL Enforcer Kits are easy to install using normal tools. No drilling or cutting (optional rear shock extensions require one minor drill). They require no driveshaft or exhaust modifications (your shock choice may require this, contact manufacturer to be sure). Simple Bolt on installation.
2.5" lift is based on increase of a 4 Door Rubicon.Â 4 Door Sport and Sahara Models will see slightly higher increases over stock and will match overall lift height of a Rubicon Model.Â 2 Door Models (all) will see slightly higher increases in lift.Â Increases will vary across all models and equipment.
Stage 1Â kits includes all minimumÂ necessary parts to lift your JL 2.5"s.
Stage 2Â kits includes Stage 1 components as well as EVO MFG Enforcer JL
Front Lower Adjustable Control Arms to allow for caster adjustments.
Stage 3Â Kits includes stage 2 components as well as EVO MFG Enforcer
rear upper adjustable control arms for rear pinion angle adjustment
Stage 4Â kits includes stages 1 components with all 8 EVO MFG Enforcer
control arms for full front and rear axle adjustments.
The difference with EVO MFG Enforcer Overland systems vs EVOÂ MFG Enforcer systems is the use of front Overland ControlÂ Arm Brackets.Â When lifting your vehicle your control arms at rideÂ height have a steeper angle towardsÂ the floor which can have someÂ negative effect/chop in ride quality.Â Â With the use of the includedÂ Overland Control Arm brackets we relocate the front control arm mountingÂ locations at the frame.Â In doing this when lifted we maintain factoryÂ flatter control arm angles and while minimal, we alleviate much ofÂ theÂ chop associated with lifting a Jeep giving even better and moreÂ improvedÂ ride quality.Â Also, in the use of Overland Drop Brackets we are able toÂ engineer more performance into the front suspension to improveÂ brakingÂ and driveline angles through suspension cycle.Â Both kits drive veryÂ well, the Overland Kits are better suited for less hard off-roadÂ crawling and more light off road and on road use.
Â Â Â * 2.5" Enforcer Kits have the option of choosingÂ front and rear shock extensions.Â These will all retain factory shocks while maintaining full shock travel.
Â Â * "K" kits include a set of EVO SPEC King 2.5" Remote Reservoir King Shocks
Â Â * "K2" Kits include a set of EVO SPEC King 2.0 Smooth Body Shocks
Â Â * "BIL" Kits include a set of Bilstein 5100 Shocks.
Front aftermarket driveshaft is not required when equipped with grouped shocks above.
Â Â Â *Front and rear adjustable trackbars are included with PLUS "P" kits.Â Recommend but not required on 2.5" kits.
Note:Â Â Depending on actual tire variances and sizes, Some minor factoryÂ inner liner plastic may need to trimmed/removed to fully clear some tiresÂ under compression.Â Â Factory wheels are compatible on all EVO MFG JL JL 2.5" Enforcer kits and can be used with the above advertised 35/37 tires.
JEEP 2" Lift Starter Suspension System JL / JLU 2018+ Application: (This Starter System is intended to be used with shock relocation brackets to retain the stock shocks. If not reusing the stock shocks, see shock fitment table at bottom of page.) Part # ...
This is a premium suspension system without the need for optional components or upsell to better shocks – this kit comes with everything you’ll need and the best shocks. What’s included in the Dynatrac EnduroSport Suspension System: 4 new coil springs, engineered to deliver comfort...
The EVO MFG 2.5â€ JL Overland Boost Suspension Systems will lift your2018+ Jeep Wrangler JL 2.5â€. The JL Overland Boost kits are specificallydesigned to lift your JL and maintain factory spring rate, complianceand ride quality while having the option of retaining factory shocks,maintaining full wheel...
The EVO MFG 2.5" JL Enforcer Lift Suspension Systems lift your 2018+ Jeep Wrangler JL 2.5"s. Our main goal in developing this kit was to give a smooth ride on and off road while giving additional lift with increased performance.Â The JL Enforcer kits are...