Carli Signature Tuned 2.0″ Remote Reservoir Shocks provide users with a comfortable, greatly improved on-road ride and entry level off-road capability. This system is the beginning of the Utilitarian suspension lineup.
Shock Diameter - 2.0"
Lift Height - 3"
Tire Size - UP TO 37"
Front Travel - 10"
Rear Travel - 12"
Base Kit Includes:
CS-DEL-R-14 - Rear Sway Bar End Links
CS-DFBD-1 - Front Bump Drops
CS-DLRC-14-H - Front Liner-Rate Coil Springs
CS-DMRC-14-R - Rear Multi-Rate Coil Springs
CS-DATB-1419 - Adjustable Track Bar with Stabilizer Bracket
CS-DRAD-14 - Radius Arm Drops
CS-DRBD-AL - Rear Bump Drops
CS-DPRBDROP-14-R - Rear Track Bar Drop
CS-DC20SPKG-14-D - Carli Tuned Fox 2.0" IFP Shocks, Front and Rear
The Commuter 2.0 system is designed for people seeking the best on-road ride quality on a budget. Utilizing front and rear Fox 2.0” internal reservoir shocks, we’ve developed a Carli Signature shock tune that delivers all around comfort and ride quality designed for on-road, in town, highway, and towing/hauling. The Fox 2.0s are fully rebuildable, built with hour-glass bushings and boast extruded aluminum construction with a clear anodizing for corrosion resistance. Fox builds these shocks with their legendary red shock oil that flows well down to -55* F. This system was tuned with factory 20” wheels on factory tires.
Your truck will sit 3”-3.5” higher in the front (cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted 1”-1.5” via Carli’s progressive coil springs.
When pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, we offer two options; Billet Sway Bar Drop Brackets or the replacement Torsion Sway Bar. The Billet Drop Blocks shift the sway bar down and forward to ensure the factory end links cycle properly throughout the entire extended travel range. Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension.
When lifting the front end of a straight axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver’s side ¾” and, in the radius arm equipped Rams, lightened caster and slight rearward axle shift. This system includes an Adjustable Track Bar to push the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application. We also include Radius Arm Drop Brackets to recenter your caster adjustment and shift the axle forward to its new center of travel.
Everything is included to support flawless operation of all components. We include bump stop drops to ensure the shocks are cycling in their designed travel range as well as a rear track bar drop bracket minimizing the rear end “wag” associated with opposing track bar suspension designs.
Wheel and Tire:
This system will fit up to a 37” tire when utilizing wheels that are no more than 9” wide with 5.75-6” of backspacing. A 12.5” wide should fit with no rubbing on the factory radius arm and only minor trimming required, while a 13.5” will require more trimming and slightly more offset to fit properly. 35” tires will fit with VERY minimal, if any trimming. We Recommend running an 18” diameter wheel for optimal ride quality (more rubber = better small bump compliance) on a 35”-37” E-rated tire running 45psi front, 40psi rear when unloaded. For more details, see our article on wheel and tire selection and tire pressures
Wheels - Carli Recommends a 18" Wheel, no more than 9" wide with 5.25-5.75" of Backspacing.
Tires - 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R
Recommended Configuration - Carli Leveling Systems are Designed and Tested on Vehicles with 18" Wheels with 35", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.
End links - Factory front endlinks are retained where as the rear endlinks are provided with the kit for cleaner travel.
Torsion Sway Bar - Selection of the Torsion Sway Bar Replacement will not use front sway bar drops.
Fitting 37" Tires - 37" Tires will fit with the above wheel specifications. Radius arms are not required but will offer more clearance for those wanting to run smaller offsets.
Part No.: CS-DC20-14-H
Vehicle Year - 14-18
Model - 2500
Engine - Hemi
Lift Height - 3"
CARLI Suspension - Billet Fuel Cap : The factory RAM diesel fuel filler was designed without a fuel cap provision, leaving your expensive engine vulnerable to dirt, debris, and sedimentary deposits that lay on top of the factory fuel filler neck. The filler is sealed...
SKU: CS-DFEU-T – For T-Style Steering ONLYCS-DLMSS-T – Stainless Low Mount Stabilizer, T-StyleCS-DBJP-03 – Ball Joint PackageCS-DATB-03 – Adjustable Track Bar SKU: CS-DFEU-Y – For Y-Style Steering ONLYCS-DLMSS-Y – Stainless Low Mount Stabilizer, Y-StyleCS-DBJP-03 – Ball Joint PackageCS-DATB-03 – Adjustable Track Bar : Has the steering on your Dodge Ram lost that...
Carli - RAM Adjustable Track Bar 03-13 SKU: CS-DATB-03 : This adjustable track bar is a must for any Dodge 2500/3500 4x4 suffering from wandering steering or with an aftermarket lift. The track bar will center the axle side to side and ensure proper suspension...
SKU: CS-DATB-14 & CS-DATB-1419– Adjustable Track Bar Allows Axle Centering up to 3″ of front lift– Tightens Steering Feel while Extending Service Life– CUB Frame Joint combines with 7/8″ FK Axle Heim to dampen vibration– JAMMIT nut boasts 100% more surface area than standard jam nut–...