THE NEW 3-6” CST S.T.L. (;STOCK TORSION LOCATION) HIGH CLEARANCE LIFT KIT IS NOW AVAILABLE. THIS CST KIT WILL LIFT THE 2011-2018 2500HD 2WD/4WD A TRUE 4 INCHES WITHOUT DROPPING DOWN THE TORSION BARS.
Stage 1 - No Shocks
Stage 2 - Rear 2.0 / Factory Front
Stage 3 - Four 2.0 Emulsion Shocks
Stage 4 - Four 2.0 Reservoir Shocks
Stage 5 - Six 2.0 Reservoir Shocks
Stage 6 - Four 2.5 Pro-Series Reservoir Shocks
Stage 7 - Six 2.5 Pro-Series Reservoir Shocks
Our new 3-6” lift kit for the 2011-18 GM 2500HD trucks is here and it will not disappoint!
This 3 to 6 inch S.T.L. (Stock Torsion Location) High Clearance design for the 2011-2018 Chevy / GMC 2500HD trucks provides the “leveled look” without sacrificing the ride quality or function.
With trophy truck quality engineering you can rest assured that this suspension lift will provide increased strength, performance, overall ride integrity, and allow your truck to perform better than stock. Throughout the initial design and R&D process we made sure to retain the factory OEM suspension geometry and design attributes.
This adjustable kit includes gusseted high clearance cross-members with a full size differential skid plate, fabricated steel / CNC machined front steering knuckles, differential drop brackets, heavy duty bump stop brackets, extended sway bar end links, brake line drop brackets, all necessary install hardware, and O.E. front shock extensions. Steering stabilizer brackets are built into the kit and our stabilizer shock kit can be purchased as an optional upgrade.
In the rear the kit includes BILLET 1" lift blocks and heavy duty zinc-plated u-bolts.
No cutting of the front differential is required or welding of any kind to install this kit. Retaining the factory front wheel track width allows this kit to work perfectly with all of the trucks stability assist features including the GM StabiliTrak system.
4-6” S.T.L. Kit Features
SUGGESTED WHEEL SIZES
(Factory O.E. 20” wheels and tires will work with the lift kit installed)
Wheels for use with oversized tires -
17 x 8" or 9" w/ 5 1/4" BS
18 x 9" w/ 5 1/4" BS
20 x 9" or 10" w/ 5 3/4" BS
(some higher offset wheels may work....test fitment required)
Tire sizes for use on factory O.E. 20" wheels!
35 x 12.50 (minor trimming required at 6" of lift)
33 x 12.50 or 13.50
SUGGESTED TIRE SIZES
Suspension set at 4” of lift / torsions at stock adjustment.
Kibbetech 2011-2019 Silverado/Sierra 2500HD/3500HD 4x4 Long Travel Kit Front 4x4 LT KIT INCLUDES ALL NEW DESIGN CNC machined Billet aluminum upper control arms CNC machined Billet aluminum tie rods Fabricated 4130 TIG welded lower control arms Fabricated/CNC machined 4130 TIG welded spindles CNC machined 4130...
Billet UCA Billet upper arm for increased strength and durability, geometry Constructed from 6061 Aluminum Teflon Lined comh20T Uniball Teflon Lined jmx14T-770 Rodends Tested Range of Motion Built in "kick" at uniball to provide maximum droop with out binding Stainless spacers Same upper arm as...
Billet upper arm for increased strength and durability, geometry Constructed from 6061 Aluminum Teflon Lined comh20T Uniball Teflon Lined jmx14T-770 Rod ends Tested Range of Motion Stainless spacers Same upper arm as the 2011-2019 coilover kit 4.5'' BS wheels recommended
Billet aluminum upper arm with uniballs and heim joints Fabricated 4130 tig welded lower arm Billet aluminum bolt in upper shock mount Includes King 2.5” remote resi coilover with springs, built to spec for this kit Sway bar end links Fabricated shock reservoir mount 100%...