FREE SHIPPING on orders over $200!*

Carli - FORD F250/F350 2.5" Pintop 2.5 System, BASE, Gas 17+


Pin It

Additional Info

CARLI Suspension - Ford Pintop System 17+

SKU: CS-FLVL-PT25-17-GAS - Ford Leveling Pintop System

3.0" Lift - 2020+ F250/350 4x4 GAS, Base Kit
2.5" Lift - 2017-19 F250/350 4x4 GAS, Base Kit

Our most popular system, the Pintop kit boasts 2.5", Remote Reservoir King Shocks. Designed and tuned in house for the customer looking for substantial on-road and off-road performance improvement. Customers can expect a softer ride, yet more control and bottom-out resistance than the Back-Country.

Shock Diameter - 2.5"
Tire Size - Up To 37"
Front Travel - 9"
Rear Travel - 13"

 

Gas Base Kit Includes:

CS-FLC-11-GAS - Front Leveling Coils
CS-FPT25SPKG-LVL-11-GAS - Carli Custom Tuned KING 2.5" Remote Reservoir Shocks, Front and Rear with Stainless Shafts & Reservoir Mounts
CS-FORDBBL-LVL-17-F - Front Brake Lines
CS-FCASTERSHIM-25 - Caster Shims
CS-FBDF-2.5-17 - High Clearance Bump Stop Drops, Front
CS-FATB-17 - Track Bar

Kit Options:

Sway Bar Option Description

Sway Bar Drop Brackets, Leveling +$
SKU: CS-FSBD-LVL-17

     Sway Bar Drop Brackets, Leveling

Sway Bar End Links, Leveling +$
SKU: CS-FEL-LVL-17

     Sway Bar End Links, Leveling

Torsion Sway Bar - WITH End Links, Leveling +$
SKU: CS-FTSB-LVL-17

     Torsion Sway Bar - WITH End Links, Leveling

Rear Leaf Option Description

Ford 17+ Progressive Add-A-Packs - Leveling +$
SKU: CS-FPAP-LVL-17

     

Ford 17+ Full Progressive Leaf Springs - Leveling +$
SKU: CS-FFSP-LVL-17

     Full Progressive Leaf Springs

Ford 17+ Full Progressive Leaf Springs - Leveling +$
SKU: CS-FFSP-LVL-17-HD

     Full Progressive Leaf Springs

Radius Arms Option Description

Adjustable Radius Arms for 2.5" - 3.5" Lifts +$
SKU: CS-FFRA-LVL-05

     

High Mount Steering Stabilizer Option Description

High Mount Steering Stabilizer +$
SKU: CS-FHMSS-17

     HIGH MOUNT STEERING STABILIZER

Low Mount Steering Stabilizer Option Description

Low Mount Steering Stabilizer +$
SKU: CS-FLMSS-05

     LOW MOUNT STEERING STABILIZER

Description:

The Backcountry on steroids, take the description for the Backcountry and throw an exponent on it. This system is our most popular, all around suspension system. The on-road ride is terrific, sharp edges are rounded and light to medium duty offroad escapades become completely controlled and uneventful. Most Carli videos were filmed with the Pintop kit showcasing the extremes of its capability.

The Pintop is a Jack-of-all-trades system from which every Super Duty owner would benefit. Raising the Super Duty Platform then adding the 2.5” diameter shocks (55% more piston surface area than a 2.0” shock) will support the argument that these trucks should come equipped with 2.5” shocks from the factory. The higher end systems will get you more off-road capability, yes, and even a bit more on-road. The premium paid for these systems; however, doesn’t compare to the on and off-road ride quality per dollar spent on the Pintop. For these reasons, it will likely remain our best seller for years to come.

The Pintop system boasts Carli specific, blueprinted, King 2.5” shocks on all four corners. In an effort to provide customers with the best product, we designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; we then tuned the shocks around the custom pistons based on the only thing that matters to us, seat-of-the-pants feel. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather can’t hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. The shocks are finished with King oil good to -55° F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.

The truck will sit 2.5” higher in the front and have more wheel travel thanks to the lighter rate Carli Coil Springs. The Adjustable Track Bar centers the front axle and Stainless Brake Lines firm up braking and ensure there is enough line for the newfound travel. To round off the front end, we include Sway Bar Drop Brackets to recenter the sway bar in the new extended travel stroke, Caster Shims to tighten the steering and a fabricated, High-Clearance Bump Stop Drop to keep the springs clear from the contacting the factory bump stop.

The rear can be outfitted with a replacement Full Progressive Spring Pack (reduces capacity to a “light” ¾-ton) or factory leaf-pack modifying Progressive Add-a-Pack (eliminates the factory block and maintains payload capacity; pairs with a rear bump stop drop). 

Related Items