– Normal operating load is 5-75psi
– Max 100psi – 2,000lb. Capacity Per Bag
– 10” of Suspension Travel
– Perfectly Integrates to existing Carli System
– Setup for Manual fill
– Fitment: 2000-2005 Excursion 4×4 with 2.25″ of rear lift
Designed to seamlessly integrate to our Excursion Lift System, these bags are rated at 2000lbs each (at 100psi, max load) providing adjustability to any load while matching travel of the rear suspension. When deflated to their minimum working load of 5psi, these bags will not affect the performance or ride of the rear suspension, nor limit travel as with most short-travel, double-bellow bags.
This system includes everything needed to add rear load adjustability to your Carli Suspension Excursion lift system. It is NOT, however, recommended for any other manufacturer’s suspension system as it utilizes the rear bump stop strike plate as the bag’s lower mounting plate; this part is only included in the Carli Suspension System. Further, the travel of the bags is perfectly matched to only the Carli Excursion system.
The Long Travel Airbags come with all hardware, airline and valves needed to install them on a Carli Suspension equipped Excursion. A compressor system can be added so long as it runs a standard ¼” airline and controls the pressures of the bags individually. These bags should not be run on a single airline with a “T” junction!
NOTE: Ford Excursion Long travel airbags will ONLY work with the 3″ rear lift! These cannot be used on a stock height truck!
These shocks are designed to work with a front lift height of 0-2" King OEM performance kit custom tuned to provide your Ford with unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal...
King Shocks OEM Performance Kits offer you a bolt-on suspension upgrade for your 2005 and newer Ford F250/F350. There is no cutting or welding required for installation! These 2005+ Ford F250/F350 remote reservoir shocks have been subjected to real word testing in order to achieve the...
CARLI Suspension - Leveling Coils SKU: CS-FLC-05- Fitment: 2020+ F250/350 4x4, Diesel - 3.5" of lift- Fitment: 2005-19 F250/350 4x4, Diesel - 2.5" of lift- Linear Rate Spring- Shot peened & Pre-set for Maximum Durability- Powder Coated for finish longevity : Our Linear-Rate coil springs are built with a custom wind, giving...
CARLI Suspension - Ford Adjustable Trackbar SKU: CS-FPRB-05– Custom Machined Spacers for Maximum Articulation and Perfect Fitment– Offset, Machined Tapered Rod End Re-aligns Axle Ball Joint For Lifted Applications– Huge Strength Upgrade: Constructed from 1.50 x 3/8″ Wall Tube– FK Race Heim Frame Connection– Fitment: 2005-2016...