FREE SHIPPING on orders over $200!*

Carli - RAM 2500/3500 Leveling System, BASE, 10-13

Pin It

Additional Info

CARLI Suspension - Dodge Leveling System, Diesel / Hemi / Power Wagon, 2010-13 Base Kit

Diesel: CS-DLEVEL-10-D
Hemi: CS-DLEVEL-10-H
Power Wagon: CS-DLEVEL-10-PW

3" front lift that delivers 50% more suspension travel than the stock Ram. Blueprinted coils paired with extended travel shocks increase control and comfort without breaking the bank.

Shock diameter - 2.0"
Lift Height - 3"
Tire Size - UP TO 35"
Front Travel - 10"

Diesel Base Kit Includes:

CS-DLRC-10-D - Multi-Rate Coils
CS-51FRONT-LVL-PKG - Bilstein 5100 IFP Shocks, Front Only

Hemi / Power Wagon Base Kit Includes:

CS-DLRC-10-H - Multi-Rate Coils
CS-51FRONT-LVL-PKG - Bilstein 5100 IFP Shocks, Front Only


A “Base Kit” SKU must be accompanied by the SKU of a Sway Bar to form a complete system.

Kit Options:

Sway Bar Options 

2010-12 - Extended Sway Bar End Links, 0-3" Lift, 10MM +$

 2010-12 - Extended Sway Bar End Links, 0-3" Lift, 12MM +$
SKU: CS-DEL-10-12MM 


3in Torsion Sway Bar +$


Add Adjustable Track Bar

Adjustable Trackbar +$


Add Control Arms


Dodge 2010-2013 Extended Control Arms +$


Dodge 2010-2013 High Clearance Extended Control Arms +$


Add Steering Stabilizer


Low Mount Stabilizer, T-Style +$


High Mount Stabilizer, T-Style +$


Opposing Mount Stabilizer, T-Style +$



The Leveling System was designed for people seeking a leveled vehicle with more performance and ride quality than a generic spacer lift. The IFP Bilstein 5100 shocks offer a nice boost in ride quality and carry a lifetime warranty through Bilstein.

The Details:

Your truck will sit 2.5”-3” higher in the front (year/cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The included, front, Bilstein 5100 shocks are longer to accommodate the extended travel and are tuned by Bilstein for increase the suspension control in the Ram platform. When pairing added down-travel with the taller ride height, the position of the factory sway bar will need to be altered as well. For this, we offer two options (unless 1994-2002, then there’s only one); extended, Sway Bar End Links or the replacement Torsion Sway Bar. The End links are equipped with ½” FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement point. Factory pillow-bushings are re-used to assemble the sway bar to the lengthened link. Carli’s Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension (in close competition with the full progressive leaf spring upgrade offered in the higher-end systems).

When lifting the front end of a straight axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver’s side ¾” and back toward the cab ½”. Although this is perfectly operable, we recommend the purchase of an adjustable track bar to shift the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application, and a set of extended control arms to shift the axle forward to its new center of travel.

Wheel and Tire:

This system will fit up to a 35” tire with stock control arms (we recommend purchasing our extended, Mild Steel Control Arms) on wheels with 5.75-6” of backspacing. If running factory wheels, we recommend an All Terrain 35” tire to avoid rubbing. For 37” tire fitment, our High-Clearance Control Arms and Adjustable Track Bar can be paired to a wheel with 5.75” of Backspacing. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures:

System Notes:

Wheels - Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5.75" of Backspacing on Leveling Systems

Tires - 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R

Recommended Configuration - Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 35", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.

Torsion Sway Bar - Selection of the Torsion Sway Bar Replacement will not Require size selection as the entire sway bar assembly is replaced.


Related Items