SKU: CS-DPAP3-19-4.25
– Add-A-Pack Replaces lower overload spring
– More predictability and Spring Progression Keeps Tires Planted
– 1″ Block included to match our 3″ Suspension Systems
– 2″-2.5″ Total lift with Add-a-Pack and Block Combination
– Includes U-Bolts and Center Pins
– Fitment: 2019+ Ram 3500 4×4, With 4.25″ Axle Tube
– Will NOT fit 2019+ 3500 with Factory Air-Assist
Description:
The 5 leaf progressive add a pack rear springs replace the lower overload leaf on the factory leaf spring pack (1″ thick leaf that doesn’t follow the contour of the rest of the pack) with 5 thinner gauge leaf spring designed to maintain the factory load capacity while increasing mobility of the spring. Improved traction and predictability are immediately noticeable and as is a much-improved ride off-road and when loaded.
The 2019 Ram 3500 brought a few changes to the platform. First, the rear axle was upgraded to the AAM 12″ from the 11.5″ in previous generations increasing the axle tube diameter to a whopping 4.25″. Additional, the rear end of the truck was lowered nearly 2″. From the factory, this give a 1″-1.5″ rear high stance. To accommodate this change, we’ve added a 1″ in house machined Billet Aluminum block to our progressive add-a-pack (totaling 2″ – 2.5″ of lift) to ensure a level stance when paired to our 3″ front lift coil springs.
System Notes:
*Same O.E.M. Load Capacity
*Zinc-Plated Hardware for Corrosion Resistance
$ 55.00
CARLI Suspension - Billet Fuel Cap : The factory RAM diesel fuel filler was designed without a fuel cap provision, leaving your expensive engine vulnerable to dirt, debris, and sedimentary deposits that lay on top of the factory fuel filler neck. The filler is sealed...
$ 1,670.00
SKU: CS-DFEU-T – For T-Style Steering ONLYCS-DLMSS-T – Stainless Low Mount Stabilizer, T-StyleCS-DBJP-03 – Ball Joint PackageCS-DATB-03 – Adjustable Track Bar SKU: CS-DFEU-Y – For Y-Style Steering ONLYCS-DLMSS-Y – Stainless Low Mount Stabilizer, Y-StyleCS-DBJP-03 – Ball Joint PackageCS-DATB-03 – Adjustable Track Bar : Has the steering on your Dodge Ram lost that...
$ 495.00
Carli - RAM Adjustable Track Bar 03-13 SKU: CS-DATB-03 : This adjustable track bar is a must for any Dodge 2500/3500 4x4 suffering from wandering steering or with an aftermarket lift. The track bar will center the axle side to side and ensure proper suspension...
$ 495.00
SKU: CS-DATB-14 & CS-DATB-1419– Adjustable Track Bar Allows Axle Centering up to 3″ of front lift– Tightens Steering Feel while Extending Service Life– CUB Frame Joint combines with 7/8″ FK Axle Heim to dampen vibration– JAMMIT nut boasts 100% more surface area than standard jam nut–...