FREE SHIPPING on orders over $200!*

Carli - RAM 3" Backcountry 2.0 System 03-09



Pin It

Additional Info

Signature Shock Tuning for the 3rd and 4th Generation, Diesel Equipped Ram trucks. 2.0" Remote Reservoir Shocks provide users with a comfortable, entry level off-road capability paired with a controlled, vastly improved on-road ride.

Shock Diameter - 2.0"
Lift Height - 3"
Tire Size - Up To 37"
Front Travel - 10"
Rear Travel - 12"

Base Kit Includes:

CS-DMRC-03-D - Multi-Rate Coils
CS-DBC20SPKG-03-D - Carli Tuned Fox 2.0" Remote Reservoir Shocks, Front and Rear, Reservoir Mounts & Limit Straps
CS-DPRB-03 - Track Bar

A “Base Kit” SKU must be accompanied by the SKU of a Sway Bar and Leaf Spring option to form a complete system.

Kit Options:

Sway Bar Options

3in Extended Sway Bar End Links +$ (Not For Power Wagons)
SKU: CS-DEL-985
     - Machined out of 17-4 Stainless Steel
     - Fk Bearing, Chromoly Rod-Ends
     - For Trucks with 3" of front lift - 1998.5-2009

        

3in Torsion Sway Bar +$
SKU: CS-DTSB3-03
     - Easily the Best "Bang for the Buck" Upgrade for ride quality
     - Allows front suspension to move freely without giving up Control

         

Rear Leaf Options

3in Diesel Add-A-Pack +$
SKU: CS-DPAP-03-D(H)
     - Replaces Rear, Lower overload spring for increaded ride quality
     - Diesel specific configuration (AAM 11.5 Axle)
     - 1" of lift

       

Diesel Full Spring Pack +$
SKU: CS-DFSP-03-D(H)
     - Softens initial spring rate at ride height
     - Minimizes Axle Wrap/Wheel Hop
     - Reduces Payload 15% From Stock 2500
     - Capable of 15" of Suspension Travel

       

Diesel Heavy Duty Full Spring Pack +$
SKU: CS-DFSP-03-HD
     - For Trucks with 1,500lbs. In the Bed at all times
     - Softens initial spring rate at ride height
     - Capable of 15" of Suspension Travel

       

Add Control Arms

Extended Control Arms +$
SKU: CS-CA-MS-03
     - Re-centers front axle on 3" Suspension Systems
     - Offset body for more tire clearnace

       

High Clearnace Extended Control Amrs +$
SKU: CS-DFCA-03
     - Re-centers front axle on 3" Suspension Systems
     - fabricated 1/4" contrucktion with even more tire clearance than the CS-CA-MS-03

       

Add Long Travel Airbag

Long Travel Air Bags, Diesel +$
SKU: CS-DLTB-03-4.0 

- Supports up to 12 inches of travel
- Compatible with 1"-2" Rear Lift, 4" requires CS-AIRBAGSPCR
- Restore Factory Payload to Full Progressive Spring Equipped Rams
- Adjustable Rear Loaded height, 2,000lbs (each) Capacity at 100psi
- Fitment: 2003-11 Ram 2500/3500 4x4 Diesel, 4.0" Axle Tube
- Non Traction Control Equipped, Single rear brake line ONLY

 

Add Steering Stabilizer


Steering Stabilizer Options +$

No Steering Stabilizer
Low Mount Stabilizer, Y-Style
Low Mount Stabilizer, T-Style
High Mount Stabilizer, Y-Style
High Mount Stabilizer, T-Style
Opposing Stabilizers, Y-Style, Lifted
Opposing Stabilizers, T-Style, Lifted

 

 

Description:

The Backcountry 2.0 system is designed for people seeking the best ride on and off-road on a budget; basically, the commuter for those that want to have a little dirt-road fun in their 8,500lb truck without losing the on-road ride quality or usability for which the truck was designed. You’re no longer limited to the highway and gravel roads become uninteresting as you can drive them at speed with one hand on the wheel. Utilizing Fox 2.0” Remote Reservoir Shocks, we’ve developed a shock tune that delivers all around comfort and ride quality designed for on-road, in town, highway, towing/hauling as well as slow to mid speed off road use. The Fox 2.0s boast extruded aluminum construction with a hard anodizing for corrosion resistance, are fully rebuildable and are built with hour-glass bushings in the rod-ends. This system was tuned and rides best with the Full Progressive Leaf Springs.

The Details:

Your truck will sit 2.5”-3” higher in the front (year/cab configuration dependent) with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The rear is lifted 1”-2” via the customer’s choice of a Progressive Add-A-Pack or Full Progressive Leaf Pack. The Progressive Add-A-Pack replaces the factory overload with a 5-Leaf, progressive pack that changes the final rate of the spring pack keeping the rear planted while increasing traction and predictability. The optional Full Progressive Leaf Pack replaces the entire factory leaf spring assembly increasing travel and drastically increasing comfort throughout the entire usable travel stroke at the cost of a 15% payload reduction from a standard 2500. This payload reduction can be supplemented back to factory 3500 SRW capacity with the addition of the Long Travel Airbags for the best of both worlds; ride quality and payload capacity/load control.

When pairing added down-travel with the taller ride height, the position of the factory, front sway bar will need to be altered as well. For this, we offer two options (unless 1994-2002, then there’s only one); extended, Sway Bar End Links or the replacement Torsion Sway Bar. The End links are equipped with ½” FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement points. Factory pillow-bushings are re-used to assemble the sway bar to the lengthened link. Carli’s optional Torsion sway bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension (in close competition with the full progressive leaf spring upgrade).

When lifting the front end of a straight axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver’s side ¾” and back toward the cab ½”. This system includes an Adjustable Track Bar to push the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application. We also recommend the purchase of a set of extended control arms to shift the axle forward to its new center of travel.

Wheel and Tire:

This system will fit up to a 37” tire with our High Clearance Control Arms and Full Progressive Leaf Springs on wheels no more than 9” wide with 5.75” of backspacing. If running factory control arms or wheels; we recommend an All Terrain 35” tire. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures:

System Notes:

Wheels - Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5.75" of Backspacing on Leveling Systems

Tires - 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R

Recommended Configuration - Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 35", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.

Torsion Sway Bar - Selection of the Torsion Sway Bar Replacement will not Require size selection as the entire sway bar assembly is replaced.

Fitting 37" Tires - 37" Tires will fit with the above wheel specifications if the system is equipped with Full Replacement Leaf Springs and Control Arms.

Fitment:

Vehicle Year - 03-09
Model - 2500/3500
Engine - Diesel
Lift Height - 3"

Related Items

Carli - RAM 1500/2500/3500 Billet Fuel Cap, Diesel 13+
Carli - RAM 1500/2500/3500 Billet Fuel Cap, Diesel 13+ $ 55.00
Quick Shop
Carli - RAM 2500/3500 Front End Upgrade 03-13
Carli - RAM 2500/3500 Front End Upgrade 03-13 from $ 1,670.00
Quick Shop
Carli - RAM Adjustable Track Bar 03-13
Carli - RAM Adjustable Track Bar 03-13 $ 495.00
Quick Shop
Carli - RAM Adjustable Track Bar 14+
Carli - RAM Adjustable Track Bar 14+ $ 495.00
Quick Shop