EVO Manufacturing (EVO MFG) solidifies performance and quality. Driven by industry leaders and engineered like no other, EVO MFG's focus is innovation is unmatched.
Our efforts are guided by bringing the highest quality and performance minded products for you.
ENGINEERED AND MANUFACTURED IN THE USA, proven worldwide.
EVO MFG is unsurpassed!
$ 111.61
EVO MFG NoLimits Manual Rubicon Swaybar Disconnect The Factory Rubicon Swaybar Disconnect is a great feature but is prone to breaking, shorting out and all around being annoying. The EVO NoLimits Manual Disconnect now allows you to defeat the overly troublesome computer system that operates...
$ 24.79
EVO MFG JK Tailgate Antenna Mount Offers a 9/16" mounting hole for mounting CB antenna, race radio antenna, or trail flags Works with factory tire carrier, bare factory tailgate, EVO MFG Gate Plate, and EVO MFG Gate Plate Vent Delete No Drilling required Easy Install...
$ 24.79
EVO MFG JK Tailgate Antenna Mount Offers a 9/16" mounting hole for mounting CB antenna, race radio antenna, or trail flags Works with factory tire carrier, bare factory tailgate, EVO MFG Gate Plate, and EVO MFG Gate Plate Vent Delete No Drilling required Easy Install...
$ 880.21
The EVO JK Rocks Stops is a rear air bump system specifically designed to fit with the 2007 and newer Jeep Wrangler JK. The addition of Air bumps allow for suppressed bottoming out forces which therefore transfers less motion and jarring to the driver’s seat....
$ 600.00
EVO Spec KING JK/JL/JT Front Bumpstop Kit  EVO SPEC King bump stops provide an additional level of bottoming control when you are using every bit of suspension travel available.  2.0 inch diameter bodies and can handle any suspension arresting loads. EVO SPEC King bump...
$ 509.10
EVO MFG JK/JL Rear Lower Enforcer Adjustable Control Arms  The JK/JL factory control arms have proven themselves to be well made and will articulate quite far, they due have some drawbacks, lack adjustability and are known to eventually fail or bend under hard wheeling...
$ 2,135.00
EVO-1109 Rear EVO LCG Bolt-On Coilover Kit (with EVO SPEC C/Os) Simple and quick installationLCG 3â€-5†recommended lift height, Fully adjustable Minimal Drilling/Cutting required, fully bolt-on Hi Clearance design Retains all factory rear exhaust system Retains factory front and rear swaybars Kits contain all necessary...
$ 3,174.04
EVO MFG Double D Bolt on Long Arm Upgrade ( Brackets, Long Arms, Hardware )
$ 270.00
The EVO MFG Jeep Wrangler JL and Gladiator JT Enforcer Adjustable Front Trackbar is made of extremely thick DOM Steel Tubing utilitizing a combination of a rubber bushing one end and spherical bearings. These give the fine tuning of axle center left to right and...
$ 495.15
EVO MFG JK/JL Rear Upper Enforcer Adjustable Control Arms  The JK/JL factory control arms have proven themselves to be well made and will articulate quite far, they due have some drawbacks, lack adjustability and are known to eventually fail or bend under hard wheeling...
$ 68.21
EVO MFG Vacuum Pump Relocation Kit for 2012 JK EVO MFG JK Vacuum Relocation is a simple install with factory hardware and works with all bumpers.Relocates factory vacuum cylinder to allow for all winch applicationsNo drilling is requiredINSTALLATION TIME 1-2 HOURS
$ 1,383.00
note: Compression Adjuster not shown in photo  EVO SPEC KING OEM Performance kits to provide your Jeep with Unparalleled levels of performance and ride quality. Each kit has been subjected to punishing real world testing to develop the optimal dampening curve. Easy bolt on...
$ 82.49
JEEP WRANGLER JK FRONT OR REAR BRAKELINE PAIR FOR 5"+ LIFTS AND EVO DOUBLE THROWDOWNS
$ 694.00
EVO Spec KING JK/JL/JT Front Bumpstop Kit BLACKÂ Â EVO SPEC King bump stops provide an additional level of bottoming control when you are using every bit of suspension travel available. Â 2.0 inch diameter bodies and can handle any suspension arresting loads. EVO SPEC King...
$ 135.30
EVO HD Sway Bar Links Available Sizes:* EVO-3136-5.5Â Length range:Â 5.5"- 6.9"* EVO-3136-7.5Â Length Range: 7.5"- 8.9"* EVO-3136-9.5Â Length Range: 9.5"- 10.9"* EVO-3136-10.5Â Length Range: 10.5" - 11.9"* EVO-3136-12.5Â Length Range: 12.5" - 13.9"* EVO-3136-13.5Â Length Range: 13.5" - 14.9"* EVO-3136-14.5Â Length Range: 14.5" -...
$ 225.50
EVO-3106B JL/JT GLADIATOR START BATTERY RELOCATE FOR FRONT COILOVER/DTD, BLACK
$ 265.00
The EVO MFG Jeep Wrangler JL Enforcer Adjustable Rear Trackbar is made of extremely thick DOM Steel Tubing utilizing a combination of a rubber bushing one end and spherical bearings. These give the fine tuning of axle center left to right and rigid strength to...
$ 648.31
High Clearance, Military Inspired, Ultra High Strength Front Bumper for the Jeep Wrangler JK/JKU, JL/JLU and Gladiator JT. Features: ¼†Steel Construction. Precision Laser Cut and CNC Bent. Deeply Recessed Winch Mounting Location for efficient vehicle cooling. Two Front Hi-Lift Jack Points Integrated In. 2â€...
$ 248.05
EVO-3003B EVO MFG JL/JT Front Overland Control Arm Drop With the use of the included Overland Control Arm drop brackets while lifted we maintain factory flat control arm angle alleviating much of the chop associated with lifting a Jeep giving even better and more improved ride...
$ 390.00
EVO-3007B EVO MFG JL/JT Front Upper Control Arms EVO MFG JL/JT Enforcer Front Upper Control Arms are made of 1.25†OD x .188 Wall DOM Tubing. Johnny Joints are used to allow for maximum articulation without the bind and spring rate of bonded rubber. Adjustable...
$ 161.22
EVO MFG JK ProTek Rear Axle Truss  Although less common than the front, the JK rear axle is known to bend causing a costly axle replacement. The EVO MFG JK ProTek Rear Axle Truss is designed to give a rigid support connecting both driver...
$ 2,025.00
EVO MFG LCG front Bolt-On Coilover Kit for Jeep Wrangler JKWith a foundation in the first and most proven coilover systems for the Jeep JK, EVO MFG brings you its new LCG Bolt-On Coilover System./br> The EVO LCG Bolt-On Coilover kit comes complete with all...
$ 338.24
EVO-3039B EVO MFG 2018-2020 JLU 3.6L Protek Engine Trans Skid From the factory the Jeep Wrangler JLU comes with decent skid plates formost of the undercarriage components but the most important andexpensive components, engine and transmission, are left completelyunprotected and therefore vulnerable to trail damage. ...
$ 2,563.00
EVO MFG - JEEP Spec JT 2.5" C/O Rear Pair Piggy Back Resi/ Black w/Adjust
$ 55.81
EVO MFG 1/4 Pounder Centered Fairlead Light Mount For use with bumper that have center fairlead openings. Â Specific use with the EVO-1112 1/4 Pounder Front Bumper. Â Made from 3/16" steel. Â Pre cut holes to fits most lights and typical 10" light bars Powdercoated...